Description
Example usage
Technical data
| Control system | multi-axis real-time interpolator, with active forecasting, trajectory, LAN communication, EtherCat, sampling time less than 1ms, correction map, RTCP, remote service access, |
|---|---|
| Working area | X 1500-3000 x Y 2100-12000 mm |
| Z axis clearance | Up to 1500 mm |
| Drive system |
Omron servo drives with EtherCat protocol, X, Y helical blades, hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 |
| Linear bearing | Bosch Rexroth 35 |
| Speed | X, Y up to 25 m/min; C, A up to 6000 degrees/min |
| Acceleration | Up to 1G |
| Software resolution | Up to 0,0005 mm |
| Positioning accuracy | 0,01 mm |
| Gate drive | double-sided master / slave with gate angle correction |
| Electrospindles | Up to 40 kW |
| Electrospindle inverter | yes |
| Maximum speed of electrospindles |
Up to 24 000 obr/min |
| Construction | Steel welded |
| Cutter shank diameters | 2 to 20 mm (option 26 mm) |
| Tool taper | HSK63 ER32, ER40 |
| Brushless electro-spindle |
yes |
| Type of table | T-slot (option: vacuum, hybrid) |
| Equipment options |
|
Big possibilities and high performance
The 5-axis Pro+ H series of machines has been designed for enterprises implementing demanding projects. These machines are designed for processing large-size details, and thanks to the possibility of working in 5 axes, it provides almost unlimited possibilities in the production of complex 3D shapes.
The 5-axis Pro+ H series of machines is based on a body made of high-quality structural steel with increased mechanical properties. A specially designed gate with supports allows for transferring much greater mechanical loads. The ribbing made in modern technology ensures increased rigidity when processing demanding materials such as prolab, aluminum, non-ferrous metals, steel, etc. The Z axis is made of a ribbed thick-walled steel profile and structurally adapted to the assembly of high-power spindles up to 45kW.
Construction
In order to maintain the rigidity and precision of machining more demanding materials, modifications were made to the 5-axis Pro + series machines. Among other things, two additional pneumatic actuators were used to stabilize the movement in the Z axis. The gate also runs on linear guides with a larger cross-section and linear bearings with preload of rolling balls of high hardness. This allowed to eliminate even minimal mechanical clearances and to take higher loads. The table of the device can be made in a vacuum system or for mechanical fastening. The control system enables completely remote monitoring of machine operating parameters in order to optimize its operation, as well as reduce operating costs. Learn more about construction »
Basic features of the 5-axis Machining Center
- high rigidity of the construction
- active tool cooling system
- versatile use
Dedicated materials
- soft and non-ferrous metals: brass, copper, bronze, aluminum
- composites: dibond, alucobond, etc.
- plastics: polycarbonate, PVC, plexiglass, Teflon, polyamides, gambit, rubber, etc.
- solid wood and wood-based panels: plywood, chipboards, MDF, OSB, etc.
- paper, cardboard, foil, etc.
- foams, extruded materials, etc.
The benefits of buying Seron machines
The advantages and capabilities of our devices are not all that you will get by choosing to work with us.
Ask for an offer
Our advisers are at your disposal. Fill out the form below and contact us!
